 |
| UM-A |
Multi-function Power meter(Energy) |
| UM-B |
Multi-function Power meter(Demand) |
| UM-C |
3 phase V/A Meter |
| UM-D |
Multi-function Powr Meter
|
|
|
|
|
| ·Display of all the electric parameters V,
A, W, Var, VA, PF, Hz, WH, VarH etc. |
| ·A powerful Acquisition Instrument for up
34 Measurements. |
| ·True RMS conversion. |
| ·Neutral current be can indicated. |
| ·Maximum function. |
| ·Field programmable PT and CT ratio. |
| ·Memory for all setup and energy data. |
| ·DIN case 144x144mm |
| ·Option: |
| 2 channels digital input |
| 2 channels analog(4-20mA) input. |
| 2 channels relay output. |
| Total harmonic distortion |
|
|
|
|
| ·Display:Red LED
0.56" high,3 Display at 5 digs. |
| ·Over range Indication:"o.L" |
·Conversion Rate:1/sec.
(Other Conversion Rate on request) |
| ·Isolation:Input/Output/Power/Case |
·Operating Temp:0～50℃/Below
95% R.H.
(No Condensation) |
·Storage Temp:-10～60℃/Below
95% R.H.
(No Condensation) |
| ·Temp.Coefficient:±0.1% F.S/℃ |
| ·CT,PT ratio:1～9999 |
| ·Interface:RS-485(Standard),or
RS-232 |
·Power Supply:AC 90～260V,50/60HZ
(Other Voltage on request) |
| ·Power Consumption:Approx.7VA |
·Dielectric Strength:DIN-IEC688,664
AC 2.3KV/1min,between terminal
AC 2.8KV/1min,between terminal and case. |
·Standards:IEC 61036 class
1,
61268 class2,ANSI/IEEE C37 90 |
| ·Isolation Resistance:DC500V,100MΩ
at above terminals |
| ·Protecton degree:Front side
IP 54-case IP20 |
| ·Dimensions:144(W)x144(H)x120(D)mm |
| ·Panel Cut-Out:138(W)x138(H)mm |
|
| ·Voltage:V1,V2,V3,Neutral |
| (These are the 3 phase Voltage
and neutral) |
| Range: |
208V/120V |
| |
416V/240V |
| |
600V/347V |
|
| ·Current:1S,1L,2S,2L,3S,NS,NL |
| (These are the 3 phase currents
and neutral) |
| Range: |
0～1A,0～5A |
|
| ·Overload: |
Voltage... |
750V continuous |
| |
|
1.25 x rated continuous |
| |
Current... |
3 x rated continuous |
| |
|
10 x rated for 10sec. |
|
| ·Burden: |
≤0.2VA per Voltage circuit |
| |
≤0.2VA per Voltage circuit |
|
| ·Frequency:45～65Hz |
|
|
|
| RS-485 Interface |
| ·Overload:1～255 |
| ·Baudrate:19200,9600,4800,2400,1200 |
| ·Protocol:Modbus RTU Mode |
| Relay output |
| ·Contact Capacity: |
| AC250V,1A resistive load |
| DC30V,2A resistive load |
|
|
 |
